How to Configure RAID in Icon Pro Series Controller

                                                

INTEL RAID

1.       Press Del for Bios setup then goto Advanced Feature

2.       Select IDE/SATA Configuration & select  configuration SATA as RAID

3.       After that save the Bios configuration system will reboot.

4.       When system starts booting again then press Ctrl I for Intel then select create Raid volume and press enter.

  

5.       Provide the volume name Raid 1 or 0.

6.       Select RAID Level as per requirement 0/1.

7.       Select Raid1 for Hard Dish redundancy.

8.       Select capacity and press Enter for create volume as per Hard Dish capacity.

9.       After completing  the process Press Create Volume.

Press Y for Yes and select Exit and Y For yes again.

After conformation of RAID1 ESC for exit.

Press Yes for Exit. 

System will automatically restart & your controller is ready with RAID1.                      

    

How to Configure SNTP Server

1.      Type Regedit.

2.      Then Locate registry entry: 

a.       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags 

                                          i.    Change the value from 10 to 5    (it means to use local CMOS time clock)         

3.      Locate registry entry: 

a.       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProvider\NTPClient

                                          i.    Enable (set value to 1).

4.      Locate registry entry: 

a.       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\ TimeProvider \NTPServer

                                          i.    Enable (set value to 1).

5.      Run CMD (Command Prompt) as Administrator.

6.      Type net stop w32time & then net start w32time.

7.      Finally your SNTP Server is ready to use.